Upgrade your Tesla Model 3 with an Orko premium carbon fiber rear spoiler and experience a new level of sophistication and excitement on the road. This sleek and dynamic upgrade seamlessly combines style and performance, enhancing both aesthetics and aerodynamics. Crafted from high-quality carbon fiber material, it adds a touch of sportiness while optimizing stability. With its lightweight and durable construction, you'll enjoy an exhilarating driving experience like never before. Stand out from the crowd and make a lasting impression with our exceptional carbon fiber spoiler tailored specifically for the Tesla Model 3.
- GENUINE CARBON FIBER + PRECISE FIT - Fits the 2017-2023 Tesla Model 3 perfectly.
- QUALITY FINISH - Manufactured using genuine high-quality carbon fiber. 3 layers of UV protective high gloss or matte clear coat.
- INCLUDED WARRANTY - 1 year manufacturer warranty.
What's Included?
- Genuine Gloss or Matte Carbon Fiber Performance Style trunk spoiler
- Double sided, autobody grade adhesive
- Adhesion promoter
Installation
Step 1: Try to work in a warm area for best adhesion
Step 2: Clean the trunk installation area thoroughly with alcohol and a clean microfiber towel
Step 3: Test fit spoiler
Step 3a: If you have a second set of hands, have one person hold the spoiler to the vehicle while the other person measures the distance from the corner of the spoiler to the side edge of the trunk and applies tape to the corner areas as a template
Step 3b: Solo install: Tape the middle of the spoiler to the vehicle to avoid it from moving
Step 3c: Measure the distance from the corner of the spoiler to the side edge of the trunk ensuring that the distance is even on both sides
Step 3d: Apply tape onto the car around the corners of the spoiler to create a template of the correct position
Step 4: Remove the spoiler from the vehicle leaving behind the tape on the trunk
Step 5: Open adhesion promoter wipes and apply to the application area on trunk. Let the adhesion promoter dry completely
Step 5a: Wait about 5 minutes
Step 6: Peel tape at the corner on both strips of tape
Step 7: Line up the spoiler within the tape template and apply with firm pressure on the middle of the spoiler, pushing firmly forward for the bottom edge and downwards for the top edge
Step 8: While maintaining pressure on the spoiler, pull the lifted tape backing from the corner
Step 8a: Pull carefully and parallel to the spoiler
Step 8b: While pulling the backing tape, apply pressure to the newly exposed adhesive
Step 9: Remove the tape template from vehicle
Step 10: Post-heat the adhesive and spoiler using a heat gun or hair dryer
Step 11: Reapply pressure to heated areas
Step 12: Wipe off fingerprints from spoiler and enjoy!
43215
Not available for shipping
Not available in stores
-thumb.jpg "01 (1).jpg")
